Godrej Front Load Washing Machine Error Code
Md Adnan •
| Error | Possible Cause | Solution |
| CLOSE THE DOOR | Door open/ not closed properly | Close the door properly |
| dO | Error is shown if the door opens during program operation | Close the door properly and restart the machine. If error persists, call service technician |
| dC | Error is shown if door is not getting unlocked at the end of the cycle | Restart the machine and check. If error persists, call service technician |
| tP | No water supply or low water pressure | Check the water supply/ water pressure/ inlet filter blockage |
| dP | Drain path is clogged or drain pump is not working or filter is blocked | Restart the machine and check. If error persists, call service technician |
| PS | Water level sensor not in order | Restart the machine. If error persists, call service technician |
| OH | Maximum temperature reached | Restart the machine. If error persists, call service technician |
| nt | Temperature probe not in order | Error is shown at the end of the cycle. Restart the machine. If error persists, call service technician |
| ht | Water is not getting hot | Error is shown at the end of the cycle. Restart the machine. If error persists, call service technician |
| LE | Input supply voltage is low | Machine will continue the operation once recovery voltage is achieved (>160V) |
| HE | Input voltage is high | Machine will continue the operation once recovery voltage is achieved (<270V) |
| OF | Water overflow | Restart the machine and check. If error persists, call service technician |
| Ub | Load unbalance during spin | Error is shown at the end of the cycle. Restart the machine. If error persists, call service technician |
| EXX (E20–E26) | Motor related errors | Restart the machine and check. If error persists, call service technician |
| tS | Turbidity sensing calibration required | Error is shown at the end of the cycle. Call service technician |
