If your Samsung double door fridge is showing a PCB error code, it means the control board has detected a system malfunction. Each error code corresponds to a specific component or function within the refrigerator. Refer to the error code table above to identify the exact issue and carry out the correct troubleshooting steps.
Main PCB Error Codes
| Blink Time | Meaning |
|---|---|
| 2 | Defrost Sensor Fault |
| 3 | Ambient Temperature Sensor Fault |
| 5 | Over ICE Problem in Freezer/Sensor Fault |
| 6 | Temperature Sensor Fault (inside Freezer) |
| 9 | Thermostat Fault (Rotary Switch Error) |
| 10 | Compressor Module Related Problem (check Power PCB Error) |
| 11 | Fan Motor Fault |
Power PCB Error Codes
| Blink Time | Meaning |
|---|---|
| 1 | PCB Defective |
| 2 | Low Voltage Protection/PCB Defective |
| 3 | 1. Compressor Problem (90%) chance 2. PCB Defective (10%) chance |
| 5 | Over Low or High Voltage Protection |
| 6 | Over High Voltage Protection |
4 responses to “Samsung Double Door Fridge PCB Error Code”
Bhai dabal dor non envetat farij Hai upar kuling kar rha hai niche nahi kar rha hai
Bhai mere pass bhi aisi hi problem thi shirf fan kharab tha to fan saaf karke laga diya to ye problem theek ho gai
Bhai double door Samsung ki fridge hai capillary pipe per cooling kar rahi hai freezer mein cooling Nahin a rahi hai kya dikkat ho sakti hai capillary
Non inverter hai to usme machanical demper hoga ya fir rotary switch hoga ya fir uper ki duct damage ho gai hogi ye sari chize check karo or haa yadi niche cooling coil hai to uske senser ko check karo ya fir fan hai to fan ko bhi check karo